I have 10 years experience doing PnP work, most has been on late model Subaru components. This is a list of the most popular services I do, but if you have something that needs some work just give me a shout and we can work out a price and get you taken care of.
I also offer core charges on some of the more popular parts so that you can eliminate down time by having the parts first then sending your good cores back in for a refund of the core charge. Inventory changes rapidly so please contact me about your needs and what I have on hand.
Text: 276 220 6237
Busted Finger Motorsports
1922 Big Ridge Rd
Clintwood, VA 24228
TGV Delete Service $99
All housings are modified with the side ports semi-permanently blocked off for a leak proof seal. All housings are cleaned and sand blasted for a final profile.
Throttle Body Service $45
This opens up the front area and gives a "knife edge" to the inlet rim to aid in a smoother air transition.
Coated Headed End Service $169
Each runner has the flange area opened up to better match the gaskets and cylinder heads, 3 to 4 inches of each runner is smoothed and blended. Then each runner gets a cross buff for a final interior profile.
Turbo Rebuild Service $350+
Most OEM or MHI turbos can be done for $350 depending on options etc... If you pair a rebuild with Porting/Coating services I will always work out a good deal for you.
Every turbo I do comes with a 1 year CHRA warranty directly through me, no middle man.
Turbo Housing PnP Service $125
This price is for both housings compressor and turbine, I open up to a knife edge on the compressor inlet to aid in flow and gasket port matching on the turbine housing.
Intake Manifold Service $109
Intake Manifold runners are port matched to our TGV Delete housings to provide a nice transition, the first 3 to 4 inches of each runner is smoothed and blended. The manifold also receives a cleaning and sand blast for a final profile.
Cerakote Ceramic Coating $30
This is a high temp air cure ceramic coating, this has a tolerance range of 1800 degrees and has excellent shock resistance. Prices start at $30 and move up depending on what is being coated, also parts that are already being modified for porting or other services I can do cheaper than just a part that is being sent in.
Colors are Black, Titanium, Green, and a custom mix Bronze.